RAM MOUNTS安裝範例 HONDA CBR150R
10 Apr

RAM MOUNTS安裝範例 HONDA CBR150R

Posted By: 建勛 Times Read: 2593 Comments: 0


Related products

RAM RAM-B-201U 三吋鋁質中夾
$600TWD

.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }   RAM MOUNTS RAM-B-201U 三吋鋁質中夾 品名:RAM® Double Socket Arm 型號:RAM-B-201U   Description The RAM-B-201U, Medium length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm, keeps the socket open, allowing you to incert the ball in to the socket connection. RAM's socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.   同需求長度,3"中夾是大部份機車手機架安裝的尺寸。RAM-B-201U中夾的雙邊開口適用B尺寸(1")的橡膠球頭,內置一個彈簧使其中夾一邊保持打開狀態,安裝上會更為便捷,只要將一頭夾在手機座/GPS座或底座,另一頭安裝時就可以保持開口,安裝更快速!   ・RAM商品重要元件之一 ・用於底座與GPS/手機架中間的「中夾」 ・共有三種長度2英吋、3英吋、6英吋,此商品為「3英吋中夾」 ・上下雙頭可用於RAM MOUNTS球頭之B尺寸(1"球頭)   材質:高硬度外塗裝之航海級鋁合金 重量:0.31Ibs 約140公克 產地:美國 注意:型號中有字母"U"者代表該產品為聚乙烯袋包裝。   ..

加入購物車
RAM MOUNTS RAM-B-349U M10 後照鏡球形底座 1.25"
$400TWD

RAM MOUNTS RAM-B-349U M10 後照鏡球形底座 品名:RAM® Ball Adapter with M10 X 1.25" Threaded Post 型號:RAM-B-349U Description The RAM-B-349U includes a M10 x 1.25 pitch male thread connected to a 1" rubber ball. Threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch with a 14.5mm flange diameter with a 10.15mm thread length. 【RAM-B-349U】為10mm公制螺絲,可安裝於機車10mm後視鏡螺絲孔位,安裝超簡便,只需將10mm螺絲護蓋拆除即可直接安裝,安裝前可先上螺絲膠於螺紋,加強螺絲固定。 ・適用10mm公制螺絲  ・可安裝於10mm後視鏡螺絲孔位  ・安裝超簡便,如欲防止鬆脫可加入螺絲膠 ・單一球頭設計,乾淨俐落 材質:高硬度外塗裝之航海級鋁合金 球頭尺寸:B Size 1" Rubber Ball 重量:0.07Ibs 約31.7公克 產地:美國     ..

加入購物車
RAM MOUNTS RAM-B-273U 中夾 擴充球座
$600TWD

  RAM MOUNTS RAM-B-273U 中夾 擴充球座 品名:RAM® Add-A-Ball™ Accessory Ball for B Size Socket Arms 型號:RAM-B-273U Description Connect another device to your existing RAM® Mount with the RAM-B-273U Ball Base Adapter. This ball is made up of a 1" ball connecting to a 1/4"-20 threaded stud with a length of 1.6". The threads on this ball replace the bolt in any B-size socket arm, and the ball connects to the middle of the socket arm on the opposite side of the tightening knob. If you are looking to mount more than one device but cannot locate multiple mounting points on your motorcycle or vehicle, this base is the ideal accessory for connecting both devices off of one mounting base. 材質:高強度複合材質 球頭尺寸:B Size 1" Rubber Ball 重量:0.08Ibs 約36公克 產地:美國 注意:型號中有字母"U"者代表該產品為聚乙烯袋包裝。   ..

加入購物車
RAM MOUNTS RAM-HOL-UN10BU 手機夾 大夾
$1300TWD

RAM MOUNTS RAM-HOL-UN10BU 手機夾 大夾 【RAM-HOL-UN10BU】手機/小平板萬用底座,可安裝之機型尺寸約5~7吋手機/GPS,寬幅限制45~114mm,手機架中間有強力止滑墊搭配原廠內附安全固定網,手機安裝更牢固,由於小平板架較大,下方有手指抓握勾方便開闔平板夾,便捷操作的的X型設計,可避免壓到手機按鍵問題,手機導航同時可邊充電,不影響手機充電孔、音源孔、按鍵*操作。  ・可安裝約5~7吋手機/小平板 ・與所有1''橡膠球頭(B尺寸球頭)零件搭配使用  ・寬幅限制58.6~85mm  ・背後充電孔之導航系統亦可使用 ・可安裝手機iPhone 7 Plus、SONY Z Ultra *手機充電、音源之相關配件線材等不包含在本商品內     ..

加入購物車

Write Comment

商品分類